Engine Rebuild Kits for Fiat and Universal (UTB) Tractors

Full Engine Rebuild Kits!

Shortblocks and Complete Engines	Flywheels and Ring Gears
Full Engine Rebuild Kits	Crankshafts, Camshafts, and Connecting Rods
Pistons, Rings, and Sleeves	Bearings, Bushings, & Thrust Washers
Valve Train Parts	Lube System Parts and Front & Rear Main Seals
Timing Gears	Core Plugs
Engine Bolts	Oil Filters

These kits include everything you need for a regular engine rebuild: new pistons, rings, wrist pins, circlips, sleeves(un-finished), standard* main bearings, standard* rod bearings, rod bushings, cam bushings, thrust washers, front and rear main seals (except 1465/1470 which have no rear main seal), and a full gasket set... a new engine in a box. Shipping anywhere in Canada or the US(excluding AK, HI) is only $39.50US!

NOTE: If you don't see your particular tractor listed here, email by clicking here and I can put an engine rebuild kit together for you to suit.

Don't undertake an engine rebuild without a service manual!

Oliver and Cockshutt 1250 DIESEL
Cockshutt and Fiat 411R
Hesston 411R:

$875.00!

Oliver and Cockshutt 1250-A (NOT 1250!) & 1255 (143 cubic inch 3 cylinder)
Allis Chalmers 5040
Long 350, 360, 445, 460, 2360, 2460
Universal UTB 350, 353, 445, 453, 500
All engines with 95MM ID x 99MM OD sleeves
$650.00

Allis Chalmers 5040
Long 350, 360, 445, 460, 2360, 2460
Universal UTB 350, 353, 445, 453, 500
All engines with 95MM ID x 103MM OD sleeves
$750.00

Long 260, 2260
Universal UTB 300:
$625.00
no sump gasket

Long 310, 2310
Universal UTB 340
:
$625.00
no sump gasket

Oliver and Cockshutt 1265 (158 cu. in.)
White 1270, 2-50 (158 cu. in.)
AC 5045 (158 cu. in)
MM G350 (158 cu. in)
Fiat / Hesston 480, 480-8:
$650.00

Allis Chalmers 5050:

$650.00

Oliver and Cockshutt 1355 (191.4 cu. in.):
$850.00

Long 550, 560 (Engine D-121)
Universal 550, 590 Super:
$850.00

Long 510, 2510
Universal UTB 530, 533:
$775.00

Long 610, 2610
Universal UTB 640, 643, 683, 703, 783
:
$950.00

Oliver and Cockshutt 1365 (209/210 cu. in.)
White 1370, 2-60 (209/210 cu. in.)
MM G450 (209/210 cu. in):
$799.50

Oliver and Cockshutt 1465
White 1470:
$1350.00

Liner or Sleeve Shim (1) for:
Oliver and Cockshutt 1465
White 1470:
$7.50

White 700
Fiat/Hesston 70-46, 70-56, 70-66, 766, 780:
$900.00

Fiat/Hesston 60-46, 60-56, 60-66, 60-90:
$799.5.00

Fiat/Hesston 566, 570, 580:
$700.00

Fiat/Hesston 666, 670, 680:
$775.00

Fiat/Hesston 65-46, 65-56, 65-66, 70-46, 70-56, 70-66, 70-90:
$900.00

Fiat/Hesston 880-5 (5 cylinder):
$1100.00

Fiat/Hesston 35-46, 35-56, 35-66:
NLA
Fiat/Hesston 45-46, 45-56, 45-66,
50-46, 50-56, 50-66:
$850.00

Special 'Oddballs' Section

Fiat 650:

$1100.00

Fiat Hesston 850:

$1350.00

Fiat Hesston 880 Four Cylinder:

$1350.00

Back To:

Allis Chalmers
Cockshutt
Oliver

Hesston
Minneapolis Moline
Universal

Long
Fiat
White

Long 260, 2260 Universal UTB 300: $625.00 no sump gasket	Long 310, 2310 Universal UTB 340 : $625.00 no sump gasket
Oliver and Cockshutt 1265 (158 cu. in.) White 1270, 2-50 (158 cu. in.) AC 5045 (158 cu. in) MM G350 (158 cu. in) Fiat / Hesston 480, 480-8: $650.00	Allis Chalmers 5050: $650.00
Oliver and Cockshutt 1355 (191.4 cu. in.): $850.00	Long 550, 560 (Engine D-121) Universal 550, 590 Super: $850.00
Long 510, 2510 Universal UTB 530, 533: $775.00	Long 610, 2610 Universal UTB 640, 643, 683, 703, 783 : $950.00
Oliver and Cockshutt 1365 (209/210 cu. in.) White 1370, 2-60 (209/210 cu. in.) MM G450 (209/210 cu. in): $799.50	Oliver and Cockshutt 1465 White 1470: $1350.00 Liner or Sleeve Shim (1) for: Oliver and Cockshutt 1465 White 1470: $7.50
White 700 Fiat/Hesston 70-46, 70-56, 70-66, 766, 780: $900.00	Fiat/Hesston 60-46, 60-56, 60-66, 60-90: $799.5.00
Fiat/Hesston 566, 570, 580: $700.00	Fiat/Hesston 666, 670, 680: $775.00
Fiat/Hesston 65-46, 65-56, 65-66, 70-46, 70-56, 70-66, 70-90: $900.00	Fiat/Hesston 880-5 (5 cylinder): $1100.00
Fiat/Hesston 35-46, 35-56, 35-66: NLA	Fiat/Hesston 45-46, 45-56, 45-66, 50-46, 50-56, 50-66: $850.00