SAFETY FIRST!

You've asked for them, and now we've got them: new Roll Over Protective Structures (ROPS) for your IH B Series tractor!

SPECIAL: New York, Vermont, New Hampshire, Pennsylvania, Massachusetts, Wisconsin residents:

70% Rebate program for a new, engineered, certified ROPS for your tractor!

You can buy your ROPS for this program through us!
For NY, VT, NH, PA, MA, or WI residents, we can arrange a ROPS rebate program purchase for almost any make or model of tractor! You must be a resident of one of these states to apply. Keep in mind only certified ROPS qualify for this program, not home or shop built.

Click HERE to check out the rebate program website!

(As other states enter the program, we will add them here. If your state is not included, lobby your farm business bureau to get on board!)

.

NY/VT/NH/PA/MA/WI Rebate Program ROPS, for:
IH B250

$1090.00US (shipping extra)

NY/VT/NH/PA/MA/WI Rebate Program ROPS, for:
IH B275, B414, 276, 434, 444, 354

$1090.00US (shipping extra)

All other States:
ROPS, for:
IH B250

$1090.00US (shipping extra)

All other States:
ROPS, for:
IH B275, B414, 276, 434, 444, 354

$1090.00US (shipping extra)

ROPS for other IH tractors available; call 613-646-7732 to inquire!

Note that these are engineered, certified ROPS for your tractor; they are not built by a welding shop with no testing procedures in place. These units are specifically engineered and tested for the tractor model they are intended for. They will not fail or cause parts of your tractor itself to fail in the event of a rollover. Serious injury, disability, or death can still occur with a non-certified roll bar; faulty welds, lighter or corroded steel, improper-grade bolts, etc., can cause the roll bar itself to fail. Conversely, over-building a roll bar can cause tractor axle castings to snap off in the event of a roll over, still resulting in the operator being crushed! Don't mess with your life!

Steel and fibreglass canopies are also available with your new ROPS in colors to suit your tractor!

Back to IH Page